Milwaukee M18 18Volt Cordless SDS Plus Rotary Hammer Drill Review

As a result of the company’s commitment to design and performance, Milwaukee tools have always had a positive reputation. The 2605-22 M18 Cordless 7/8′′ kit is a rotary hammer designed specifically for the rotary hammer category. Battery power is provided by two 18-volt lithium-ion batteries, which are included in the box. This is a powerful equipment that is capable of drilling through even the most difficult masonry with little effort. In the event that holes need to be drilled into concrete walls or floors, this is the instrument for the task. As you will see in the next section, it offers characteristics that put it on par with the finest rotary hammer drill on the market.

Milwaukee M18 18-Volt 24mm Cordless SDS plus Rotary Hammer Drill

Each and every other manufacturer must be envious of the cordless Rotary Hammer that we have here. Milwaukee has created a three-mode machine that performs as well as a corded tool while being much more compact. This cordless rotary hammer has more than proved its worth on the worksite, with a maximum drilling capacity in concrete of an astounding 24mm and a drilling capacity in wood of an equally amazing 30mm. It is possible to use any SDS Plus or SDS Multifit bit with this tool, which is powered via an all-metal gearbox and has an impact rate of up to 4,200 Impacts Per Minute. Milwaukee’s ‘Variolock’ mechanism enables the chuck to be locked in a variety of positions for chiselling, increasing the tool’s flexibility even more. This is the ‘Skin Only’ version of the device, however it is also available as a full kit, which includes batteries and a charging station. In addition, Milwaukee’s Five-Year Tool Warranty applies to this skin!

FIRST IMPRESSIONS

In order to assess how the Milwaukee M18 Fuel SDS-Plus Rotary Hammer stacks up against other 18V hammers on the SDS-Plus system before it even arrived, I conducted a comparison test.

I’m just blown away.

With 3.3 foot pounds of impact energy (or 4.5 joules if that’s what you’re comparing it to), 5000 BPM for an impact rate, and a maximum speed of 1350 RPM, there’s basically nothing else that compares in terms of performance. Makita’s 18V X2 (36V) hammer comes close to the competition in terms of power, but it falls short of the other 36V hammers I tested.

The Milwaukee 2715-22 kit was my choice. This package includes the tool, depth rod, and auxiliary handle, as well as a charger and two 5.0 amp hour batteries, all of which you would anticipate. In addition to the standard kit, there are many more alternatives available, including the bare tool, the 5.0 AH kit with specialized dust extractor, and the 9.0 AH kit. The hammer weighs 7.7 pounds without the battery of your choice, which isn’t particularly light, but it’s well within the acceptable range for tools in this class, corded or not.

The control switch has three basic modes: drilling, hammering/chiseling, and hammer drilling – as well as a preset that enables you to spin the chisel to the angle you want before locking it in place.

The tool is equipped with an LED light, which is placed at the bottom of the tool. I didn’t have much of a need for this since I wasn’t working in a low-light environment, but it seems to be sufficiently bright.

Compact and lightweight

With this remarkably tiny and light tool, I was able to eat right through the wood and drill straight into the concrete with no difficulty. Given how compact it is, I didn’t have to remove nearly as many deck boards as I would have otherwise to make room for it in my workshop. It also fit quite easily between the joists, allowing me to drill straight through the ledger and into the concrete with relative ease as well.

Benefits:

  • For optimum flexibility, the rotary hammer may be operated in three modes: rotary hammer, hammer alone, and rotation only.
  • When the bit becomes stuck, a mechanical clutch protects the tool.
  • The all-metal gear case offers the best possible seating for the gears, resulting in increased service life.
  • By reducing vibration, the anti-vibration technology ensures that the user has the greatest amount of comfort.

MILWAUKEE M18 SDS-PLUS ROTARY HAMMER KEY FEATURES

The REDLITHIUM battery technology, which is exclusive to the company, is one of its most noteworthy characteristics. Comparing alternative choices, owners may anticipate to get more work done with each charge and to get more charges in before having to repair any of the equipment. The motor, on the other hand, is an 18V spinner that is capable of producing speeds between 1,400 rpm and 4,800 bpm when no load is applied. It has a torque capacity of 1.4 foot-pounds, allowing for quicker drilling and harder impacts as a consequence. This device differs from others in its class in that it has three different operating modes: rotation alone, rotary hammer, and hammer only. Even while dealing with difficult tasks, an anti-vibration mechanism helps to keep it steady.

  • Milwaukee’s POWERSTATE brushless motor offers greater power, more run-time, and a longer life than conventional brushless motors.
  • It is possible to achieve unparalleled levels of performance, protection, and productivity with REDLINK PLUS Electronic Intelligence since it allows for enhanced communication between your batteries and equipment.
  • With greater run-time, power, and a longer battery life than any other battery pack on the market, the Milwaukee REDLITHIUM battery pack is the most durable available.
  • The AVS Anti-Vibration System, which reduces vibration for optimum comfort, is also available.

MILWAUKEE M18 FUEL SDS-PLUS ROTARY HAMMER SPECIFICATIONS

  • Model: Milwaukee 2715-22
  • Voltage: 18V
  • Battery: M18 REDLITHIUM 5.0 Ah
  • Charger: M18 and M12 Multi-Voltage Charger
  • No Load Speed: 0 – 1,350 RPM
  • Blow Energy: 3.3 ft-lbs
  • BPM: 0 – 5,000
  • Solid Bit Capacity: 1-1/8″
  • Thin Wall Core Bit Capacity: 3″
  • Drilling Mode: Rotary Hammer, Hammer Only, Rotation Only
  • Handle Style: Drop Motor
  • Vibration: 8.6 m/s2
  • Length: 12.8″
  • Weight: 7.7 lbs
  • Includes: Multi-Voltage Charger, (2) Battery Pack, Depth Rod, Side Handle, Carrying Case
  • Battery Warranty: 3 years
  • Warranty: 5 years

Job-site Tough

Originally, they had been connected using uncoated powder actuated nails, which were unable to withstand the caustic nature of pressure treated timber and were thus removed. Typically, I’ll put the wood in position and then use the rotary hammer to drill through both the wood and the concrete to finish the job. This technique is much quicker than other ways of obtaining information.

Using The Milwaukee M18 Cordless SDS Plus Rotary Hammer

When drilling smaller diameter 3/16” holes, the tool’s vibration was perceptible but not tingling, and it was nearly completely usable with one hand when drilling smaller diameter 3/16” holes. Milwaukee did an excellent job here with the mix of a compact size, low weight, and power that they have put together.

There were about twenty-five 3/16″x6″ holes (through approximately 2″ of wood and 4″ of concrete) that I drilled, and I did not have to change the batteries. A significant amount of hard drilling may be accomplished with only one single charge!

When it came to lighting the joist bay, the LED was very handy. Milwaukee seems to be putting LED lights on all of their cordless tools, which I think is a good thing.

PERFORMANCE

When it comes to real-world performance, class-leading performance numbers are meaningless unless they are translated into actual performance, and the Milwaukee M18 Fuel SDS-Plus Rotary Hammer does not disappoint. We are not your average concrete contractors; instead, we specialize in road maintenance and repair. As a result, our requirements are very diverse, and we have a mix of planned work and reactive work as a result of accidents.

The sign installation project has been the most time-consuming job we’ve had on our plate during the last several weeks. All of these fasteners have to be driven into concrete using the Milwaukee M18 Fuel SDS-Plus Rotary Hammer, which is an excellent match for the tool..

Runtime

As previously said, we are not the kind of users that “pull out the rotary hammer for the day” like the concrete professionals out there. However, it is precisely this kind of hit-and-miss job that makes going cordless so handy. A year ago, using a rotary hammer meant attaching a generator to a 100-foot extension cable. Today, it means nothing. My men used a DeWalt hammer drill for the sake of convenience; it wasn’t the most effective tool, but it did the job just well.

Because the equipment came with two 5.0 amp hour batteries, I instructed my crew to use the first one until it was completely depleted. It took three days before I realized I needed to change the batteries.

Power

Some of my men have been using a Bosch 36V SDS-Plus Rotary Hammer, so we decided to put it up against the Milwaukee 2715 and see how it stacked up. Despite how amazing Bosch’s hammer is, Milwaukee outperforms it by a wide margin with its 3.3 foot pounds of blow energy. It also has a faster reaction time and a greater impact rate, which distinguishes it from the competition.

A task that was taking my men an hour to complete is now taking them just 23 minutes thanks to the Milwaukee M18 Fuel SDS-Plus Rotary Hammer, which was purchased for $199. They were able to more than quadruple their output rate thanks to one tool. A performance like that is the sort of thing that you just cannot ignore.

Maintenance

The procedure for doing maintenance is very simple. Before and after each usage, users should thoroughly clean the area. Lubrication of moving components should be performed on a regular basis to avoid wear and tear.

Accessories

This package already includes two batteries as well as a charger for each of the batteries. It will just take an hour to fully recharge the battery. Its maximum bit capacity for solid walls is 7/8 of an inch, which is the industry standard.

Who can use this cordless rotary hammer drill?

This drill is ideal for individuals who want to fill out their tool collection for doing minor tasks around the home or in the garage. It comes in useful when you need to drill through concrete walls in order to place anchors or create voids in the wall. If a task requires the use of a special drill to complete it, then take this out to avoid irritation. Because it is cordless, it is portable and convenient to use anyplace. Neither searching for an outlet nor dealing with potentially hazardous cables are required. Some experts choose to utilize this model since it has the specifications that are comparable to those of more expensive models.

How does this rotary hammer drill compare to similar hammer drills?

1. Milwaukee vs Bosch

For good reason, Bosch is a well-known and highly regarded brand in the business. Every product produced by this company demonstrates the renowned German precision engineering. Among the drills in this category, the Bosch GBH 18V — 20K21 is probably the closest rival to the Milwaukee drill. This is a 3/4-inch incher with SDS-plus package, which includes the rotary hammer tool, battery, and charger, among other things. The handle placement and control arrangement of the cordless machine are quite similar to those of their American equivalent. The scores for impact energy and BPM are quite comparable.

2. Milwaukee vs DeWalt

Because of its brilliant yellow hue, the DeWalt series is simple to identify from a distance. In addition, their performance is a notch above the others. The DCH 293X2 is an excellent demonstration of the brand’s competence. This tool has a brushless 20V motor as well as an L-shaped SDS plus rotating hammer for more versatility. It has a capacity of 9.0 AH, which provides amazing power when required. The impact energy is 3.5 joules, whereas the RPM is 1,000 and the BPM is 4,480. RPM is a measure of rotational speed. It features vibration control and a concrete drilling range of 5/8′′ to 7′′, which is an ideal range for concrete drilling.

3. Milwaukee vs Makita

This Japanese toolmaker will not allow itself to be left behind by its foreign competitors in terms of technology. Because it has an 18V brushless motor and SDS+ bit compatibility, the Makita XRH01Z is a rather decent alternative tool. This cordless tool is equipped with battery optimization technology, which allows it to be used for longer periods of time in the field. The motor is very efficient and operates at a lower temperature, which helps to reduce wear and tear. Even with the battery attached, it weighs just 7.2 lbs, making it very portable and simple to transport about a jobsite.

What do users say about this rotary hammer drill?

According to the users, this drill allows them to do their tasks considerably more quickly and easily. It is a pleasure to have around since it allows you to do practically any kind of drilling that you may need around the home. It is also used by a variety of other kinds of professionals. Electricians, for example, use it to drill holes through walls and install electrical boxes in their work. The battery lasts long enough to do tasks without the need to seek for a cable. It may be small and lightweight, but it has more than enough power to do the task at hand. Its interior temperature also maintains a reasonable level, allowing you to continue working toward a quicker finish.

The Usual Suspect

The only negative aspect that I could discover was that it was difficult to insert the charging cable inside the casing. But, apart from that, the case is well-designed, with enough of space for the tool, two batteries, supplied accessories, and, most significantly, bits (which are frequently neglected).

Overall Impression

This is a fantastic instrument that is low in weight, simple to use, and pleasant to work with on a daily basis.

My favorite feature of this SDS drills tiny drill is the mix of its small size, light weight, and high power. This drill is a total jerk!

I’ll be grabbing for this rotary hammer whenever I need to drill concrete in confined places or just don’t want to bother with cables. Very well done.

Keeping Dust Extraction in Mind

In addition, this tool integrates perfectly with the M12 Hammervac, particularly when used in conjunction with one of Milwaukee’s current battery chargers, which can charge both an M18 and an M12 battery concurrently.

Pros

  • Anti-vibration system with a five-year limited guarantee
  • Battery life is extended at 1,400 RPM and 4,800 BPM.

Cons

  • kit could be cheaper

Top Milwaukee Rotary Hammer Drill Questions and Answers

Q: Does this kit come with a hard case?

A: Some kits are packaged in a soft bag that is both lighter and less protective than a hard bag. This one comes with a protective case that is more convenient for storing.

Q: Does it comes with a charger and two batteries?

A: This is the whole package, which includes everything you’ll need to get started right away, including two 18V batteries and a charger to keep them charged throughout the day.

Q: Is the outer shell all plastic?

A: Milwaukee has opted to utilize aluminum for the majority of the machine’s housing, with plastic being used only in a few key areas of the machine. The selection and arrangement of materials instills more trust in the product’s long-term durability, even when it is used on a regular basis.

THE BOTTOM LINE

It goes without saying that the Milwaukee M18 SDS-Plus Rotary Hammer is the finest in its class in terms of all performance parameters, and this translates into exceptional real-world performance. There are hammers available that are lighter and have less vibration. However, despite the fact that the Milwaukee 2715 does not rank first in any of those areas, it is competitive. Finally, you have to sacrifice so much performance in order to get reduced vibration and weight that it isn’t really worth it in the long run.

Spread the love
Exit mobile version