Worried about wet & damped wood for DIY or carpentry? Here you’ll learn how to dry wood fast for woodworking or seasoning. Drying wood isn’t that easier you think. It takes a long time occasionally. Applying some scholastic and technical strategies, most carpenters and woodworkers dry wood logs, timber, plywood sheets, and bulky trunks nowadays. Let’s see how it works and what are the process to make this quicker.
Usually, there are two types of wood drying techniques- indoor and outdoor. Indoor drying means you dry all wood logs inside rooms or storerooms. Likewise, outdoor drying is made for outside or backyard. While drying any wood, we need some tools or accessories for better finishing. Especially, stickers and stack boulders are a must for drying wood.
Carpenters, lumberjacks, woodworkers, or woodcutters cut long sheets or flat wooden logs, firstly. After removing dust with a brush, they place all logs inside a room. This room must be dry, safe from insects, and the warmest place in a house. Usually, we dry up with dehumidifiers and table fans. A dehumidifier prevents extra humidity and the fan regulates proper air-flow. Indoor drying takes a lot of time if the logs are thicker and more humid.
For sunny areas, outdoor drying is the best method for basic dehydration. Most people in Oregon and Kansas dry wood by this process. They stack the wood stockpile under the sun and the continuous air-flow keeps the stockpile dry. However, there are some pre-tasks to do before outdoor drying. Before making a stockpile, you have to remove all dust, damped portions, scraps, and other dirt.
Microwave Wood Drying
Apart from the two types, recently there’s a development in this drying technique. The microwave wood drying technique is a modern, sophisticated method for wood drying. However, this method is costly because of huge electricity consumption. Moreover, drying wood with the Kiln method is good for beginners. Later in this article, we’ll explain more about this.
However, the time tested by the air dry technique has been successfully drying wood. It seems important to us to show you how to dry wood for woodwork in a pleasant way. Now, this is probably not the quickest way to dry all the wood processes, but it is also not slow. If you do so in the right manner, your timber can dry sufficiently to be suitable for any woodworking project only a few weeks or a few months. Let’s get to it and see how most people dry wood for woodworking successfully.
Step-1: Trimming or Seasoning
Trim soft, damped, uneven spots on a wooden log before cleaning up. You’ll find a lot of such spots on softwood logs, acacia wood, plywood, and oak trees. Season if there are more uneven areas. Use a chisel or trimmer to do this perfectly. Sometimes the backside of a hammer can be used for a damped spot.
Step-2: Clean Dust
After trimming or seasoning scraps from logs, clean the total stuff with a brush or soft fabrics to remove specks of dirt, dust, ashes, unwanted marks, oily or greasy spots, etc. Swipe loose branches, leaves, wet moss, shrubs from the wooden sheet.
Step-3: Use Insecticides
To save the wood from bugs and insects, brush vinegar on the smooth evenly areas. You can use insecticide or pest control toxics, varnishing paint, chestnut oil, etc. Some people use a little flamethrower on this area to make it stiffer. We recommend not to do such a thing because of safety issues.
Step-4: Seal or Putty
Due to tree age or growth marks, sometimes we see lots of tiny holes, medium holes, or large gaps between growth textures. You have to seal those spots or putty. Use sawdust with adhesive and paste into these holes. It would make the log harder enough and rigid. Even after drying, it can fill the surrounding areas of a log.
Step-5: Stack and Dry
After having all set, take those wood logs to the drying place. Place a waterproof polyethylene sheet or triple on the floor. Place the thickest log first, then place some spacers or stickers on it. Place the second thickest one and continue onwards.
The image shown here is an excellent example of stacking wood logs. If you don’t have triples or waterproof sheets, use some hardwood logs or bulky frames on the floor before placing wet wood sheets.
Step-6: Use Dehumidifier or Fan
In the stockpile room, use dehumidifiers or desk fans to dehydrate the room climate. Moreover, a fan reduces the room temperature and dry wet areas of wood-stock. However, make sure there are perfect gaps between the two logs and so on. If you need to dry your wood quickly, you have to think about using both a dehumidifier and a big air drying fan. If you have no time to use a traditional timber drying system like air-drying with project time limits, it is a bright option for seasonal timbers.
If you have access to a kiln, and the wood you want to dry is not too big, go ahead with it and dry it. In just a few hours you can go from wet to dry wood. Kiln-dried wood is a much more efficient drying process than air-drying wood, as both temperature and moisture can be managed, even when steam levels are regulated.
A light, wood-based frame that carries the plastic is constructed around the stacked and bound wood. To keep the moisture in, all seams must be clamped with vapor barrier tape. For around 4 months, the wood stayed in the furnace and averaged 8 percent. This is mostly 2″ thick, Madron-like arbutus.
Consider a sponge. If a sponge is wet, humidity is found in every cell or hole. It not only releases this humidity as it dries but is reduced in scale. It could transform or curl as it dries when cut to a practical form, like a rectangle. However, when present, it does not lose the ability to re-absorb water. Any time the sponge absorbs and releases moisture, its physical dimensions can change. Similarly, during the drying process, wood will lose much of its moisture, but the ability to replenish humidity within its atmosphere will not be lost.
Dry lumber can be dried by many methods. The removal of moisture from the wood to the surface, from air-drying to kiln-drying and special seasoning processes, is part of all methods. The heat and air movement are the key factors that make drying possible and quicker. The following are the drying methods:
Air Dry Features
The most familiar method for every area in the world. This method is perfect for windy and sunny or dry places. For example, Australia and Texas have many dry and sunny areas where the woodworkers apply this technique to dry wood fast for woodworking. Most deserts are dry and windy as well.
Less expensive and affordable. Sometimes free of cost.
High-quality craftsmanship and personal efforts.
Vibrant colors are kept on wood logs.
Takes a long duration to dry.
Degrades wood’s quality.
Less moisture sometimes damages log shapes.
Shed Dry Features
This means placing wood in a wall-free shed avoiding direct contact with sunlight and precipitation and yet ensures good airflow. In this drying process, the rate of drying is also controlled by the use of plastic mesh curtains, which open them in damp weather conditions and close them when the weather is heat and dry.
Low moisture degradations are eliminated here.
Environment-friendly and ergonomic.
High-quantity of wood logs can be done at a time.
Expensive/ high-quality investment is needed.
Klin Dry Features
We’ve mentioned this Klin drying technique and strategies already. This is the most impressive technique to dry wood faster. Especially, the wood stockpile, safety, easy caring features, and eco-friendly behavior are awesome in this strategy.
Low moisture content is permanently solved here.
Not dependable on external factors like climate, rain, sun, dew, etc.
Balanced outcomes from the Klin machines.
Bright in color and perfect shape.
Faster process ever.
High investment at the initial process.
Non-vibrant color on & off.
More fragile for softwood, birch, eucalyptus, etc.
So far we’ve described a lot on Klin features, air dry techniques, tips & tricks, categories; but now we’re going to show some popular wood drying equipment or tools. These tools are versatile and easily maneuverable, lightweight, portable most of the time. Besides, very few people use these tools to dry wood fast. Not that mandatory to buy however you can see the benefits and specifications here. We enlisted the most popular 3 tools here-
4-in-1 combo meter.
Stihl digital moisture meter.
Stihl and Haddon are top-class manufacturers of tools & equipment. Read more about Stihl goods here.
4-in-1 Combo Meter
Scan wide areas of wood and drywall with the pinless pad sensor with the MMH800 combo humidity meter. After detecting moisture spots, flip the cap to reveal the pin sensors for better measurement of moisture content. It has two displays: one for humidity and one for temperature and humidity in the environment.
Perfect for wood moisture content, water level, damped wood, etc.
Excellent beep sound while detecting excessive moisture levels.
Auto power-off feature to save battery life.
Both degree and fahrenheit scales are available.
1y warranty and 6-month guarantee.
Stihl Digital Moisture Meter
This functional moisture meter can also be used for testing the moisture level of other materials, such as plaster or cement as well as to test the moisture levels of firewood or construction timber. The portable measuring instrument often shows the air temperature in the area.
Key Features of Stihl
Best quality product.
Ideal for softwood, firewood, etc.
Cordless, sturdy, lightweight.
3.3 x 2.2 x 1.4 inch
4 AA batteries
Reasons to Buy
Cheap, affordable, and stiffer.
Best for port anywhere.
Perfect for ambient temperature.
Reliable, durable, easy to use.
Pre-assembled with batteries.
Haddon lumbermaker is a perfect tool that acts as a bench vise or lumber vise. To fix any lumber or timber woods, you need to make the whole log stationary or immobile. Haddon lumbermaker has adjustable screws that fix any types of longer or wider logs. This Haddon is designed for vertical use of your saw along a 2×4 or 2×6, Granberg horizontally uses your saw. This Hadden is a simple, extremely carefully designed tool. It usually works by cutting a pair of logs flat. For cutting boards or planks, it is not practical except for very large logs. If you’re using the Haddon, you have to get a small level to attach it to the top of the tool to keep your screw vertical.
Key Features of Haddon
Versatile equipment for any lumber, timber wood, plywood, hardwood.
Perfect for plunge cuts.
Top-class USA product from Stihl sponsorship.
Fits all chainsaws and cuts accurately.
Best performer after cyclone, tornado, hurricane, or natural disaster.
8 x 3 x 8 inch
Reasons to Buy
Lifetime warranty (limited).
Adjustable vise for woodworks.
Good for furniture, huge trunk, vise works, DIY.
Worth of money and cheap.
Comes with a 30-page manual filled with many still images.
Nevertheless, there are lots of wood drying tools and equipment on marketplaces. We picked the most reliable and apt items here. You can see more details on the corresponding product pages or image links.
So far, through this article, you probably know how to dry wood fast for woodworking and we hope you’ll do better than previous clumsy works. If you tell us which method is the most applicable to dry wood fast, we recommend Klin drying for sure. Many Asian and European countries use this method to dry tons of timber wood regularly. China, Russia, Estonia, Canada, Kenya, and some states of the USA have specific storage or concealed room (customizable) to run this Klin method. Later we’ll elucidate these significant rooms in some other article. If you like these methods or the post, share this with your closest ones. Keep commenting and suggesting us for better movement onwards. Happy woodworking!