A sander is a woodworker’s best friend; however, it is more crucial to pick up the best sander for furniture stripping most of the time. If you are a beginner and don’t understand what stripping is, it is basically removing the existing finish of a piece of furniture to apply a fresh coat for a better, shinner, and prettier look. Stripping is the technical name for removing the existing finish. It is mostly done with the help of a sander. There are many different sanders available in the market and if you want to purchase one that does the job right, you need to carry out some research. Lucky for you, we have already searched the internet, far and wide, and have found the best 5 sanders. These sanders are easy to use and very suitable for use with furniture. Go through this list to make an informed decision and pick the one that suits your style and budget.
BLACK+DECKER has been around since 1910 and is known as the manufacturer of the sander for furniture stripping. The BDERO 100 is yet another successful product of the brand. The BDERO 100 is a 5-inch orbital sander that takes care of your material removal needs very conveniently. It uses the rotatory action of the sanding blade to give your wooden or other objects a high-quality finish. It comes with a hook and loop system that provides ease in changing the paper. It uses a corded electric power source of 120 Volts to function, with a current tolerance of 2 Amperes. Since it uses direct power, it does not have any batteries included in the box. The BDERO 100 comes with a manufacturer’s warranty valid for 2 years. It is very easy to handle and provides fast, easy and incredible material removal, ensuring customer convenience to the fullest.
The special features of the BDERO 100 sander include a dust-sealed switch that does not allow debris to get into the power switch and a loop and hook system for ease in paper exchanging. The sander comes with a dust bag that collects the debris for easier cleaning. The small size of this device makes it easy to handle and more mobile. The random orbit movement of the sander provides fast removal of debris and a high-quality finish.
The device has an ergonomic design that makes it fit perfectly in your palm and hence gives you a lot of control over the movements. The power of the sander is directly proportional to the weight you apply to it, which is great for intense projects.
Reason to buy
Gives a swirl-free finish.
Easy to move.
It comes with a sandpaper and dust collector.
Reason to avoid
Sanding surface is concave
Why do we recommend it?
We recommend BDERO 100 by BLACK+DECKER because it is an inexpensive option that works fine for small and medium-sized projects. It is compact and easy to store with your other tools.
The Ginour 6+Max Variable Speed Random Orbit Sander is a powerful tool that can do 12000 rotations in a single minute. It can be used at 6 varying speeds, there is a dial that you can use to adjust the speed based on the intensity of your project. This sander also comes with an attachable dust container. The container makes sure you do not end up with dust all over your workspace and the project. The dust-box also has a microfilter system for dust absorption which is very efficient. The switch of the sander is designed to be dust-proof so it can’t get jammed by dust particles. The device comes with a pack of 10 sandpapers. Each sandpaper is of a different grit so you can use them for all different kinds of projects without having to spend extra money on buying sandpapers separately. It works great at removing blemishes, stain, paint and even varnish. For their huge reputation, the recent expert’s first choice for the best sander for furniture stripping is Ginour. Ginour ensures the best quality of its product as well as offers a lifetime warranty and a free replacement.
Furniture Stripping Features of Ginour
The special feature of the Ginour 6+Max Variable Speed Random Orbit Sander is that it comes with a variety of sandpapers and has a strong motor. It can do 12000 rotations per minute which means that the machine moves so fast that it will not leave any marks or scratches behind. Its variety of sandpapers can assist you from an easy job, like stain removing, to a tough job like stripping off all the paint, very easily. The sandpapers can be attached to the head like velcro and are very simple to maneuver.
The palm grip is covered with rubber for the comfort of the user. No matter how much you push on the sander you will not hurt your hand because the sander’s grip is designed to perfectly fit the shape of a palm. It is further insulated by the rubber so it does not dig into the hand. The overall design ensures lesser vibration and noise.
Reason to buy
Variety of sandpapers.
Great dust collection.
Reason to avoid
It doesn’t have a long life.
Why do we recommend it?
If you are looking for a cheap product for simple household jobs, then we recommend this to you. It is easy to carry, and easy to store. It has a nice dust collection system, so you won’t end up messing up your home. You can check also the best tools for cutting drywall
The BO4556K Sander from Makita can do 14 thousand rotations per minute thanks to its 2 AMP motor. It is brilliantly designed and has a rubberized grip that is contoured to ensure extreme comfort. The BO4556K Sander weighs around 2 pounds so it is a very lightweight sander. It produces little vibration and noise because it is equipped with ball bearing. The switch of the BO4556K Sander is sealed in rubber so you do not have to worry about dust particles getting inside it. Another dust-related feature is the dust gathering system. The BO4556K Sander does dust collection directly through the pad, which means it gathers most of the dust. So you can have a clean workplace. The BO4556K Sander comes with a tool kit which is a great way to store it or transport it. This machine will give your wood a great and smooth finish while getting rid of all the stains and paint. The BO4556K Sander is not only good for novice users who do small home projects but also for professional woodworkers who do frequent high-intensity projects.
The BO4556K Sander from Makita has a very efficient dust collection system. There are 6 holes in the sandpaper, as the sander moves across the wooden surface and sands it, the particles created get sucked up these holes, like a vacuum cleaner. The particles then move to the attached dust collector. The dust collector can be removed to be cleaned. Moreover, the BO4556K Sander from Makita has a double counterweight system to ensure that there is no excessive vibration.
The BO4556K Sander from Makita makes paper installation very easy due to its large clamps. The large clamps are easier to handle and make sure you get full control over how much you want to tighten the paper. The balancing system consists of not one, but two counterweights to ensure extreme comfortability by reducing vibration.
Reason to buy
It comes with a tool kit.
Efficient cleaning system.
Reason to avoid
Clamps are thin.
Why do we recommend it?
If you want to have a sander with which you can sand 2-3 hours every day without worrying about the motor, then this product is for you. It would last you least 2 to 3 years even if you sand daily. It comes with a great storing kit so if you are a handyman who has to take his tools from place to place, this would be a good option. You can check also Best Belt Sander for Knife Making
The DEWALT DWE6411K Palm Sander has a 2.3 amp motor which enables it to reach 14 thousand OPM. Its dust-collection system has secure locks that make sure the dust does not leak out and safely reaches the dust-bag. The DWE6411K DEWALT Palm Sander has a lower height than other sanders by DEWALT, this modification was made to ensure comfort and to make the user come closer to their work. It has a good balance and does not vibrate too much, this is because of the extra counterweight. The DWE6411K Palm Sander has a rubber dust protector over the button to make sure no dust gets inside the button and cause problems. The sander works with a ¼ sheet of sandpaper of any grit. When purchasing, customers can select the grit of the sandpaper they wish to use, if they want. The tool also comes with a matching tool-bag which is great for carrying it around or just storing it in the house.
The DWE6411K by DEWALT does not use velcro to stick the sandpaper to the head of the sander. It uses clamps to stick the square sandpaper, this is a good approach as many velcro based sanders don’t hold the paper that well. So no matter how much you sand you don’t have to worry about the paper flying off it. It is also very lightweight and comfortable to hold so anyone can easily use it. Its powerful motor makes sure it gets the job done without leaving any marks or tracks.
The clamps make it very easy to install or remove the paper. The clamps are very efficient and ensure that the paper does not slip or fold while you are sanding. Moreover, the body is ergonomically designed to be easy to hold. It is very lightweight and does not wear out easily.
Reason to buy
Has a carrying bag.
Clamp to hold sandpaper.
Reason to avoid
The dust bag gets filled quickly.
Why do we recommend it?
If you are okay with paying a few bucks more than the cheapest options out there, you should definitely buy it, it is worth the price. It will last you for years and give you a great smooth furniture stripping experience.
The WEN 6301 is designed to cater to your furniture stripping jobs, it has an angled tip that can easily reach nooks and crannies. The pad is only 3.75 x 5.5 inches so it is easy to use on delicate designs as it covers a small area at a time. Even though it looks like a small machine it’s motor can do thirteen and a half thousand OPM. It is perfect for small projects and for carrying around as it only weighs 2 pounds. Its lightweight makes sure that you do not get too tired while using it. It is a good detail sander that allows you complete control of its movements as you can easily sand the intricate woodworking projects. While the WEN 6301 comes with only 1 sandpaper, WEN sells replacement sandpaper of all grits, they are easily available on amazon. The WEN 6301 comes with a 1-year warranty that testifies WEN’s faith in its product.
The angled body of the WEN 6301 is its most special feature. There are many sanders in the market that have a great motor and can strip paint easily. But they give you trouble if you want to sand tiny areas like corners or designs. The machine is too big and hard to maneuver into the desired place. That problem is solved by WEN 6301, with its small sandpaper and pointed tip, it can reach most hard-to-reach areas, ensuring the best sander for stripping.
The WEN 6301 is lightweight and so is comfortable to use for long hours. It also has fan-assisted dust slots that ensure a quick collection of dust. So you can work carefree and not have to clean up afterward. Its grip has an ergonomic design that makes it fit inside your hand without any irritation.
Reason to buy
Reason to avoid
Not suitable for a full paint stripping job.
Why do we recommend it?
If you are a professional woodworker that is looking for a tool that can help you with designed wood, this is the tool for you. We highly recommend it for people who have many woodworking projects from clients. Because these days most furniture has beautiful designs and hence curves and edges.
How to Choose the best sander for furniture stripping?
Not only are there many models of sanders, but there are also some general types. It can be confusing to choose the best sander for furniture stripping from diverse categories. Following are some factors you should consider when buying a sander:
The Type of sander
Firstly you need to determine what type of sander is suitable for your requirements. There are belt sanders, in which sandpaper rotates like a belt over 2 small drums. It is suitable for large plain surfaces. There are also Orbital sanders in which the head moves in circles, these provide a smoother finish than belt sanders but are slower. You can also get a random orbital sander which is like the orbital spinner except it spins and orbits, causing lesser scratches.
Make sure the sander comes with a built-in dust bag. This is because sanding creates a lot of flying debris which is not only messy but also dangerous. Consider the size of the bag, keeping in mind the length of your project.
Good sanders have vibration control, this is important because too much vibration can be detrimental to health. You could end up permanently damaging your arms if the sander vibrates too much.
Decide how much time and power the project you do on average takes. Make sure the sander you buy can provide that much power.
Easy to Use
If you can afford it, go for a sander that has an ergonomic design, properly placed buttons and switches and is low weight. These features contribute a lot to the comfort of the user.
Why should you buy a sander for furniture stripping?
There are many ways to create furniture stripping. Two of the most popular ones are sanding with a sander and stripping with a chemical stripper. The chemical stripper is a liquid or gel that is applied to the furniture and takes some time to break the chemical bonds of the paint with the furniture. After the paint is visibly flaking off, any scraper can be used to scrape it off. The question is, why would you use a sander when you have the alternative option? The following are some pros of using a sander:
Sander can handle angles
The paint stripper sounds great but it can be very hard to scrape out of the twists and turns of the designs on your furniture. Whereas a sander comes with grit heads of various sizes and can easily handle angels.
Easily remove multiple coats
A chemical paint stripper cannot fully remove every last drop of paint, especially if the item in question has multiple coats. You would have to use a lot of paint strippers over and over again which is not only messy but also very time-consuming. A sander can easily remove multiple coats of paint in much less time.
Sander leaves no sticky residue
Most people who use chemical strippers complain that the furniture was left covered in a sticky residue. Obviously, the stripper uses a chemical reaction to de-attach the paint from the wood and sometimes there is a by-product of that reaction. Buy a sander to strip the wood without any mess.
No Wait time
After you apply the paint stripper, you have to wait for a long time to see its full effects. Whereas, the sander is a brute-force approach and has no wait times.
How to care for your furniture stripping sander?
Purchasing a sander is worth it because it is a very useful tool. But you need to know how to take good care of your best sander for furniture stripping, only then will it have a prolonged life and be worth the money spent on it. The following are some tips on how to care for your furniture stripping sander.
Properly attach sandpaper
Attaching the wrong size of sandpaper, or attaching the right size in the wrong way are both extremely detrimental to the health of your sander. Make sure the paper you are choosing is compatible with the sander in terms of size. After that, place the sandpaper on the edge of a table and roll it up and down, this helps in smooth installation. When installing the sandpaper, first attach the clamp on one side, smooth the paper, stretch it and make sure there are no wrinkles, and only then attach the clamp on the other side.
If you leave your sander dirty, then the dust and particles of wood could clog up the motor, affecting the performance. Make it a routine to clean your sander properly after each use, or at least at the end of the week. Always unplug the sander before starting the cleaning. Use a nozzle of pressurized air to force out any bits stuck in the services. After that use a sponge and a mild detergent to clean the body and the cord.
Every tool should have its rightful designated spot in your workspace. Before storing your sander you should always clean it as mentioned above. You should also loosely wrap the cord around the body of the sander to avoid tangles with other cords. Make sure that the place where you are storing the sander is cool and dry.
A clean workplace is not just important for organization and productivity but also for the safety of you and your sander. If you use the sander in a place that contains a lot of dust in the air, the sander might start emitting sparks which may lead to injuries or even fires.
How to use a sander for furniture stripping?
So you decided to take on a furniture project, did your research and now own the best sander. Besides, having no idea where to begin, don’t worry; here is a handy guide on how to use a sander for furniture stripping.
The first step is to wear a dust mask, eye protection glasses, and gloves. Only with proper safety precautions can you use a power tool like a sander.
Attach the Sandpaper
You should know about the various grits of sandpaper and which to use when. The method of attaching the sandpaper to the head of the sander is quite simple but varies for different types of sanders. You can find instructions for that in the manual. What you need to know is that you must start with the roughest grit, that would be the smallest number. For example, start with an 80 grit paper, after one pass, move on to 150 grit, you can end with a 220 or 400 grit.
Draw Lines for Uniformity
After you select and attach your sandpaper, use chalk to draw lines all over the wood. These lines will help you ensure that you actually sand every part of the wood. Sander will erase the chalk lines it gets in contact with, so you can keep track of how much you actually sanded.
Move with the Grain
Now you are ready to plug in your sander and move it on the surface of the wood. Remember to not apply too much pressure and let the weight of the sander do its job. Make sure you are moving the sander slowly in the direction of the grain of the wood. Moving it in the opposite direction can cause abrasions. After you sand the entire surface you can turn off the sander.
Once your sander is off, use a clean dry paintbrush to clean the surface. There will be a lot of wood-dust on the surface, make sure to clean thoroughly because if you don’t, the next steps will be ineffective.
After clean-up, you can consider one pass with the sander done. For the next pass, you have to use a finer grit. For example, if the first was 80, use a 150 now. Do not jump to an ultimately fine grit like 400 directly, you will end up sanding a lot more than needed and wasting paper and power.
Raise The Grain
You can have as many passes as you see with, using a finer grain each time. But just before the last pass you have to raise the grain. The term “raising the grain refers” to adding some material to the wood to make it temporarily rough. The benefit of doing this is that when you sanding it away, you end up with an extremely smooth surface. You should always use a water-based solution to raise the grain.
Use the finest grit, like a 400 for the last pass. After the last pass, you should clean the surface thoroughly and put away your sander safely.
People Also Ask – FAQ
What is the best way to sand furniture?
Are you facing difficult tasks like sanding hardwood flooring, furniture, wood panels, or stained floors? Using the wrong drill or material will make the task difficult and you may end up damaging your tools. So, instead of immersing the drill in a bucket of water while you sand with a sanding block, learn how to use a sandpaper of different grits and grades. You can also use a sander with a drum sander attachment to remove dingy stains and scratches from car interior surfaces.
The most common type of sander is the random orbital sander, and it is used to sand wood, metal, and plastic. Random orbital sanders move in a circular pattern, and are the most common type of sander that one will find in a workshop. The orbit of the sander is not the same as the orbit of a car, but it is the same as a car’s orbit around the Earth.
Sanding is the process of removing imperfections in wood or other materials using an abrasive material, typically an abrasive sandpaper. The material removed by sanding is sometimes referred to as “swarf”.
You can sand furniture with a sanding block. Use a belt sander for large surfaces or a handheld sander for smaller areas. Use 120-grit sandpaper for the finest finish.
Should I use an orbital sander when refinishing a table?
When you refinish any piece of furniture, there are always some things you have to think about before you go ahead. First, if you are refinishing an old table, you have to take into consideration that the surface of the wood grain might not be exactly like the original wood. If you were refinishing an oak table that has a subtle pattern in the wood grain, it is possible that the pattern would have been different on the original table than the one that you are refinishing, depending on the age of the wood.
The orbital sander is a common tool used in many areas of home improvement. It can be used for a variety of tasks, including sanding wood, finishing a floor or removing stickers from items. In this article, you’ll learn the difference between the stationary and orbital sander, the advantages of each type, and how to choose the best sander for your needs.
Use an orbital sander with a sanding pad to quickly remove the finish on the table, leaving behind the raw wood underneath. Follow this step with a fine sandpaper to smooth the surface and remove any scratches left by the orbital sander.
Yes, orbital sanders are meant to be used on furniture as they offer a more even finish than bumpy sanding can.
What kind of Sander Do I need to remove paint?
Sanders are available in a variety of styles and price points. Knowing which kind of sander is best for you is important, because you will need to choose the right sander for the job you have in mind. For example, you will need to decide whether you want a belt-driven sander or one that has a motor. The sander you choose will determine what kind of work you will be able to do with it. For example, a belt-driven sander is best suited for softwood (or soft-plastic) furniture, and a motor-driven sander is best for hardwood (or hard-plastic) furniture.
If you’re looking for a sander to get rid of paint, you have quite a few options, ranging from full-size belt sanders to electronic sander options with interchangeable heads. However, the sander you pick depends on what you’re going to do with it. Most people use their sander for sanding wood or finishing a large project, but there are a few who use their sander to do other things, like removing paint.
If it is oil-based paint, you will need to use a sander with a vacuum attachment or a drywall sander.
First, consider the size of the workpiece you are sanding. Then, consider the type of wood. Finally, consider the condition of the workpiece.
Is it better to sand or strip furniture?
SANDING is a very effective and practical way of removing the paint from a furniture piece. Using this technique, you will be able to have a smooth finish to the top surface of your furniture, as well as clean the surface. However, when it comes to sanding your furniture, it is important to consider all the factors before you start. The first factor is the kind of sandpaper. Since the sandpaper is moving against the surface of the wood, it is important to consider the material of the wood. It is preferable to use sandpaper that is made from paper and this is not recommended for hardwood furniture.
How to strip furniture is a common question that comes up when we are looking for answers, as we are generally not trained on how to strip furniture properly. In this article, we will give you a rundown of what tools and materials you need to strip furniture, and a few tips on how to do it properly. After you read it, you will be prepared to strip your furniture at the next get together.
Sanding or stripping furniture depends on the type of finish on the surface of the wood and the desired results.
Sanding is better because it removes the surface of the wood, leaving an even color and smooth finish. Stripping removes only a thin layer of the surface of the wood.
The Bottom line
Woodworking is great craftsmanship and innovative talent. It requires a great many tools and a sander is one of the most important ones. We researched to provide you with some options for when you need to buy a new sander. So we curated this list of the best 5 wood sanders for stripping paint. When choosing a sander from the options, consider your budget and power requirements. We recommend the BDERO 100 by BLACK+DECKER for large plain surfaces like a tabletop. But if you need to strip paint from intricate designs that have hard to reach areas the WEN 6301 would be the more suitable option. Always remember to wear safety gear when using a sander, if you have any more questions, feel free to contact us, we are always happy to help.